REAR BRAKE WHEEL CYLINDERS x2 (Vauxhall Cresta PA Parts) (**From 1958- 62**)

Here's a new pair of Rear Brake Wheel Cylinders (0.75") (x2) for the following models from Vauxhall -

VAUXHALL

Vauxhall Cresta PA  (From 1958- 62)

(** From Ch. PA 56.571 in 1958 **)

You MUST Read This -

These Cylinders are for later models from 1958 onwards where the Inlet Pipe Hole and Bleed Nipple Hole will be the Same size - Both 3/8". You Must Check that before buying these..

Not for early models made during the first year of production (1957- 58 To Ch.PAS/PAD56,571) where Inlet Pipe Hole was larger 7/16"x24 UNS than the bleed nipple hole 3/8"x24 UNF. 

(The Earlier type Rear Cylinders will be available shortly so check back here - Or ask me).

The End Caps (As indicated by the Old Stock part in the picture) are not included with these cylinders as I have not yet finished making them. New seals for them are included - So as long a you can get the old one out you can put a new rubber on and re-use it with the otherwise completely new cylinder.

NOTE- If you're also replacing the copper brake pipes, the Pipe that goes into the Rear Wheel Cylinder has to be a Double Flare.

My cylinders are a fair price and are available to Everyone.