FRONT & REAR BRAKE WHEEL CYLINDERS x6 (Hillman Minx Parts) (Ser. 1,2,3,3a,3b,3c) (**From 1956- 63 Only**)

Here's a new set of Front & Rear Brake Wheel Cylinders (x6) for the following models from Hillman-

HILLMAN

Hillman Minx Ser.1              (1956- 57)

Hillman Minx Ser.2              (1957- 58)

Hillman Minx Ser.3             (1958- 59)

Hillman Minx Ser. 3a          (1959- 60)

Hillman Minx Ser. 3b         (1960- 61)

Hillman Minx Ser. 3c         (1961- 63 Only)

(**Not for any later Minx's from 1963 onwards which all had Front Discs**)

(** Out of Interest - From 1964 onwards they switched from these Manual Adjusting Rear Cylinders to completely different Self Adjusting Rear cylinders. That is -They all had Front Discs anyway by the time they stopped using the rear cylinders I'm supplying **)

(** ie The Minx was never made with Front Drums and the later Self Adjusting Rear Cylinders**)

These are only for the Audax shape which is the car pictured.

(Not for earlier the earlier California shaped Minx Mk7 / Mk8 of 1954- 57)

These Cylinders were all remade to the original Lockheed design using Genuine old stock samples. They all have Replaceable Seals.

(Original Part No/s 81281, 81282 & 103893).

NOTE - Fit the Rear Cylinders from the **DRUM SIDE** They will not go through the back plate if you try to push them through from the **AXLE SIDE** 

My cylinders are a Fair Price & they're available to Everyone.